Skip to main content

Appears the Re-certified Rip It bats are now illegal, as all non-wood bats must have silk screen or other permanent marking BBCOR .50, not a post production sticker. The re-certified Rip Its have a sitcker. Am I interpreting these rules correctly? A little late in the game to come out with this!?
Original Post

Replies sorted oldest to newest

The .50 BBCOR sticker must be silk screened on the bat so it is tamper proof. The re-cert bats have the NCAA sticker added to them to make them NCAA compliant and I believe they still have the .50 BBCOR sticker silk screened on them. Thus my understanding is that they are legal.

The original Rip It's without the NCAA sticker on them are not allowed in NCAA play but are still useable in UIL from my understanding of the rule that I have seen.

I could be wrong, wont be the first time. My suggestion would be to ask the coach, becuase they should have a list.
As of today and it can always change...

Straight from the TASO State Rules Meeting...

BBCOR BAT STANDARD RULE 1-3-2d

• Beginning January 1, 2012, the Batted Ball
Coefficient of Restitution (BBCOR) performance
standard for non-wood bats is the only standard
allowed.

• The BBCOR certification mark shall be
rectangular, a minimum of one inch on each side
and located on the barrel of the bat in any
contrasting color.

• No post-production, BBCOR label, sticker or decal
will be accepted on any non-wood bat.

BBCOR BAT STANDARD

• Bats that have only the BESR certification
mark are not allowed for play.

• Some bats will have both the BBCOR and the
BESR certification marks on the barrel of the
bat. That bat is legal for play.NON-WOOD BAT

• To be considered a wood bat, the bat must be
a single piece of wood.

• A bat that is not a single piece of wood is
considered to be a non-wood bat and must
meet the BBCOR performance standards.
Last edited by TX-Ump74

Add Reply

Post
.
×
×
×
×
Link copied to your clipboard.
×