If i'm 6'2" about how long should my stride be without overstriding?
Original Post
Replies sorted oldest to newest
quote:Your stride should be as long as possible while still being able to maintain good posture and balance and not inhibiting good hip rotation.
quote:Originally posted by cap_n:
Something to keep in mind is, the farther you stride out, and the lower you get to the ground, the harder it is to rotate around the front hip.
quote:Originally posted by thepainguy:quote:Originally posted by cap_n:
Something to keep in mind is, the farther you stride out, and the lower you get to the ground, the harder it is to rotate around the front hip.
Excellent point.
I think 70-90 percent works for most people.
Very few people can stride 100+ percent and still get good hip rotation.
quote:Originally posted by jacetheace:
The front leg must become a fulcrum to shoot violent energy into the torso then the arm. The chain must whip and that starts in the landing leg with a violent recoil or stopping effect.
quote:Originally posted by dm59:
I must be missing something because I don't see where locking the front knee was recommended.
quote:Originally posted by thepainguy:quote:Originally posted by jacetheace:
The front leg must become a fulcrum to shoot violent energy into the torso then the arm. The chain must whip and that starts in the landing leg with a violent recoil or stopping effect.
I disagree with this.
While some pros do lock their GS knees, many hard throwers do not (e.g. Tom Seaver). Instead, they always keep the GS knee flexed.
Oh don't get me wrong you can have a flexed knee but still have it firm giving the same energy translation into the torso. A taller, less flexed knee gives more down plane. Flexed gets rise (like Seaver lived on) to compliment yak action. He pitched north-south as well as east-west.
Just gotta be carefull that the leg is firm to start the kinetic chain of whips no matter what degree of flexion.
That means that this is not essential to throwing hard. I didn't mean LOCKING or hyler extending...I'm taking energy absorbing to kick into the next rest of the chain.
I believe this is one of the big reasons why Prior went south. He wast hinking so much about getting out in front (from House) that it softened his knee, dropping his body and arm arm that started seving up flat, straight, hittable meat.
Also, locking the GS knee increases the strain and shock experienced by the knee and the hip socket.
I teach my guys to throw against a firm front side, but to always keep some flex in the GS knee.
quote:Originally posted by jacetheace:quote:Originally posted by thepainguy:quote:Originally posted by jacetheace:
The front leg must become a fulcrum to shoot violent energy into the torso then the arm. The chain must whip and that starts in the landing leg with a violent recoil or stopping effect.
I disagree with this.
While some pros do lock their GS knees, many hard throwers do not (e.g. Tom Seaver). Instead, they always keep the GS knee flexed.
Jace Response:
Oh don't get me wrong you can have a flexed knee but still have it firm giving the same energy translation into the torso. A taller, less flexed knee gives more down plane. Flexed gets rise (like Seaver lived on) to compliment yak action. He pitched north-south as well as east-west.
Just gotta be carefull that the leg is firm to start the kinetic chain of whips no matter what degree of flexion.
That means that this is not essential to throwing hard. I didn't mean LOCKING or hyler extending...I'm taking energy absorbing to kick into the next rest of the chain.
I believe this is one of the big reasons why Prior went south. He wast hinking so much about getting out in front (from House) that it softened his knee, dropping his body and arm arm that started seving up flat, straight, hittable meat.
Also, locking the GS knee increases the strain and shock experienced by the knee and the hip socket.
I teach my guys to throw against a firm front side, but to always keep some flex in the GS knee.
quote:Originally posted by jacetheace:
I believe this is one of the big reasons why Prior went south. He wast hinking so much about getting out in front (from House) that it softened his knee, dropping his body and arm arm that started seving up flat, straight, hittable meat.
quote:Originally posted by dm59:
I think he's describing the right things but that phrase (violent recoil) might not be the best way. The "stopping effect" isn't a problem. It's what happens and is desirable with respect to the front hip. I just read his post and took it to mean the right things but could have been worded otherwise. The point's there and I didn't read it as recommending locking of the front knee.
quote:Originally posted by Roger Tomas:
Take a look at this clip of Mark Prior and tell me if you think he has a softened front knee. I don't see it. What I see is his front leg firms up, the front hip stops, the back hip rotates around the front hip, and then the front leg straightens to soften the follow-through.
quote:Originally posted by jacetheace:
Hey his motion was flawless at one time. I just think that he went too far with the towel drill (trying to get too far in front) therefore taking energy DOWN and flatening his ball flight.
His ball became flat...period. I think it has a lot to do with the whole over extending that House doen't get yet (or maybe he has as much as he changes)
Of course there may have been other factors. One classic explanation from House was "he eats too many seeds"....hahaha
quote:Originally posted by jacetheace:
Really? Please explain. What is the flaw in his arm action? Tell me more about the inverted W
quote:Originally posted by jacetheace:
See this pic of Smoltz
quote:Originally posted by jacetheace:
OK good. Now show mw what a healthy arm action should look like. Compare Clemens, Johnson, Smoltz etc and show how it is different. This is a very interesting topic howver we need to be clear. Why is this wrong? What is better....be specific....thanks
quote:Originally posted by Roger Tomas:
Lots of speculation about the cause of Prior's problems. And everyone seems content to ignore other factors:
NCAA PAP
2005 PAP By Starting Pitcher
Also, I believe USC has a bit of a reputation for overworking pitchers. (Don't know first hand - just something I've heard.) Prior went to USC. Painguy mentioned Anthony Reyes above - guess where he went to college? I mean, guess what college Reyes was attending when he had arm problems?
I don't know the cause of Prior's problems. But I'm not willing to accept speculation.
quote:Originally posted by dm59:
The biggest difference is where the forearm is pointing at this point. In Prior, it's just above horizontal, while Ryan and Clemens have it closer to vertical. Therein lies what I believe may be problematic, not the height of the elbow during that fleeting moment.
quote:Originally posted by thepainguy:
PAP has been pretty thoroughly discredited by guys like Bill James.
quote:Second, I don't think it's a coincidence that both Prior and Reyes went to USC and have similar mechanics. You see the same thing in the mechanics of Ian Kennedy.
quote:I think these guys are being taught to do something that is both dangerous and unnecessary to throwing well or hard.
quote:Originally posted by Roger Tomas:
Taken at face value, PAP has its shortcomings. But if you're correct about the inverted "W", then would you not agree that throwing more pitches with those mechanics be more likely to lead to injury than throwing fewer pitches with those same mechanics? And would you not agree that there is a cumulative wear and tear that takes place which is also exacerbated by overuse?
quote:Originally posted by Roger Tomas:
I think too often people look for isolated causes of injuries when they should instead be looking at multiple compounding causes plus their cumulative effects over time.
So, pain, are you agreeing with my contention that the height of the elbow isn't the root cause here because it isn't there for an appreciable amount of time? It may be a "sign" that the real cause of any alleged problems is about to happen.quote:I agree that the horizontal position of the forearm at this moment may be the difference.
What you get as a result is 45 to 90 degrees more external rotation at the moment the shoulders start to turn (and thus more stress on both the elbow and the shoulder). You see something similar in the mechanics of Chris Carpenter and BJ Ryan.
quote:Originally posted by dm59:So, pain, are you agreeing with my contention that the height of the elbow isn't the root cause here because it isn't there for an appreciable amount of time? It may be a "sign" that the real cause of any alleged problems is about to happen.quote:I agree that the horizontal position of the forearm at this moment may be the difference.
What you get as a result is 45 to 90 degrees more external rotation at the moment the shoulders start to turn (and thus more stress on both the elbow and the shoulder). You see something similar in the mechanics of Chris Carpenter and BJ Ryan.
quote:I was taught when your in the power T position the elbows cannot be behind the plane of the back or else you are restricting the movement of the shoulder joint
quote:Originally posted by deemax:
bb27quote:I was taught when your in the power T position the elbows cannot be behind the plane of the back or else you are restricting the movement of the shoulder joint
I would re-address what you were taught, there is literally a mountain of evidence that this is false.
quote:Originally posted by BB27:
The true problem with Prior and others is the fact the elbows get behind the plane of the back. I was taught when your in the power T position the elbows cannot be behind the plane of the back or else you are restricting the movement of the shoulder joint
quote:Originally posted by BB27:
The inverted W is not the problem. To get into the power T position you have to form a W sometime in the windup.